Model: CL-DW-915M

 915M/433M DMX Wireless Remote

It is DMX wireless remote to receive the DMX signal from DMX controller and eradiate the signal to the other DMX wireless remote to contrcl the fixture in DMX signal .

Specification ：
Model Name ：DMX wireless remote.
Input Power ：9V/500MA.
Wireless Space ：150M(Blank place).
Working Frequency ：915M/433M.
Spit Power ：15DB.

Sketch ：
1.Wireless SMA connector
2.DC input outlet
3.DMX sognal indicator light
4.DMX wireless remote ： Signal Receipt (Green)、signal eradiation (Reb) wireless DMX signal indicator light .
5.Working frequency indicator light ，915M(Red)、433M(Green) .
6.The first switch code sets up the DMX wireless remote to be signal receipt(Slave) or signal eradiation (master) the 2nd switch code is schoosing the working frequency .

User manual ：
1.    When you take it to be the master unit， the DMX signal indicator light (4 ) is red. DMX wireless will receive the signal from DMX contoller ahd eradiate it out.lf the indicaor (4 ) fiashes，it is working for the eradiation.

2.    When you take it to be slave unit，the DMX signal indicator light (4 ) is green. DMX wireless will receive the signal from masterunit DMX wireless and change it to be DMX signal to control the fixture. If the indicator(4 ) flashes， it is working for the receipt.If the indicator fladhes irregular or without any flash , you need to adjust the antenna angel or shorten the space between each other .

3. When DMX wireless was set to be master unit， if DMX signal indicator(3 )flashes， the master unit is receiving the DMX signal .

4. Working frequency  indicator light (5 ) is red， the unit is working on the frequency 1(915 M) .

5. When the working frequency indicator light (5 ) is green green , the unit is working on the frequency 2 (433M) . Please note that the master unit and slave unit must be in the same  working frequency， otherwise it will not work for the DMX control .

6. Master mode or slave mode must be set up .

7. The working frequency 1 (915m ) or 2 (433m ) must be set up.

Packaging: 2PC/CTN.

Size: 24.5×18×6.5(cm).

Weight: 2KG.